Clarifying Juice Step by Step: Racking, Agar and the Centrifuge

Batching and Prep, Clarification Methods, Techniques and Methods

Clarifying Juice Step by Step: Racking, Agar and the Centrifuge

Dave Arnold's decision trees for clearing a juice or puree, with or without a centrifuge: when settling is enough, how to clarify with agar by freeze-thaw or the quick method, and how to spin acidic juices with fining agents.

  • Based onLiquid Intelligence by Dave Arnold

At a glance

Dave Arnold's decision trees for clearing a juice or puree, with or without a centrifuge: when settling is enough, how to clarify with agar by freeze-thaw or the quick method, and how to spin acidic juices with fining agents.

  1. Thin, low-acid juices can be cleared by adding 2 g of SP-L per litre, settling overnight in a round container and racking, at the cost of a quarter to a third of the yield.
  2. Thick, non-settling or acidic products need agar: 2 g per litre of total, hydrated in a small portion, boiled, then tempered into the cool rest.
  3. Freeze-thaw gives a slightly better yield, while quick clarification is faster but develops agar wisps after a day.

If you have no centrifuge

First look at what you want to clarify. If it is thin, less acidic than grapefruit juice, settles a little by itself and will keep a day in the fridge, as unpasteurised apple, pear or carrot juice and even orange juice do, you can often clear it by adding SP-L and letting the solids settle. Settle and rack gives poor yield, and you lose between a quarter and a third of the product, but it could not be simpler.

Settle and rack

Add 2 grams of Pectinex Ultra SP-L per litre of juice and stir thoroughly. Put the juice in a clear, round container, clear so you can see what is happening and round because square containers kick up particles when moved. Leave it in the fridge overnight and carefully pour the clear juice off the top. A mixture of strawberry puree and apple juice treated this way stays cloudy and foamy after a couple of hours because the air from juicing and blending has not settled. The fix is to stir in a little kieselsol, which breaks up the bubbles and mops up the last cloudy particles, but clarity has its price and the yield is low.

Thick, non-settling or acidic: use agar

If the product is thick, does not settle, or is more acidic than grapefruit juice, use agar. Buy powdered agar and always the same brand, because brands differ; Arnold uses Telephone Brand from Thailand. Unless you are clarifying lime or lemon juice, you may choose freeze-thaw or quick clarification, but lime and lemon must be quick-clarified. The steps:

  • Step 2: pretreat with SP-L? Thin juices made with a juicer, such as cucumber and citrus, do not need it. Thick juices and purees, such as tomato, strawberry or raspberry, need 2 grams of SP-L per litre or kilo, or the yield will be awful. Add it directly to the blender if you are blending. In a cold product it needs an hour or so, near body temperature a couple of minutes.
  • Step 3: divide the batch. Let the product come to room temperature first, or Step 6 goes wrong. If it is not very heat sensitive and is thin, such as orange, grapefruit or ginger juice, heat only one quarter of it with the agar and recombine afterwards; from a litre of grapefruit juice, a 750 ml part and a 250 ml part, with the agar going in the 250. If it is heat-sensitive, alcoholic or thick, such as lime juice, strawberry puree or gin blended with raspberries, hydrate the agar in water instead: for every 750 ml or grams of product, reserve 250 ml of water.
  • Step 4: measure the agar. 2 grams for every litre of the total: for a juice-water mix like lime, 2 grams for 750 ml of juice plus 250 ml of water.
  • Step 5: hydrate the agar. Do not add agar to hot liquid, because it clumps. Whisk it into the small reserved portion at body temperature or colder, then heat to the boil and hold it there for a couple of minutes, stirring, then lower the heat and cover so too little liquid does not boil away.
  • Step 6: temper. Add the unheated liquid to the hot agar, never the other way, whisking vigorously. Agar sets very fast once it cools below about 35 degrees C, unlike gelatin, and hot added to cold would drop the temperature too fast and gel too early. The batch should end just above body temperature.
  • Step 7: set. Pour into a bowl, pan or tray (he uses 2-inch-deep hotel pans) and let it set undisturbed, faster in the fridge or an ice bath. Do not stir it while it sets. It is ready when a light touch feels like a very loose gel and a slight tilt does not make it run.

Step 8: freeze-thaw or quick

If you need the juice right away, go quick. If you have time and freezer space, freeze-thaw gives a slightly better yield with fewer headaches, and quick-clarified products tend to develop agar wisps if kept longer than a day, which can be stirred back in but are irritating.

Freeze-thaw. Freeze the set gel solid; a layer 2 inches thick or less freezes overnight. Crack it out of the container without hot water or a torch and without shattering it, pulling on opposite edges and then flipping it and hitting the bottom. Put the gel in a draining cloth (an unbleached cotton tablecloth is better than cheesecloth, which is almost gauze) in a colander over a container and let it thaw, a couple of hours on the counter to start and then in the fridge. Drain off and save what drips now and then; when the dripping liquid has no flavour or colour, the agar is spent. Combine the drippings.

Quick. Gently break the gel with a whisk into something like broken curds, pour into a cloth napkin or filter sack and let the clear juice run out. Do not squeeze hard, or cloudy agar bits go through. The cloth clogs quickly, so gently pinch a portion and rub the cloth against itself to free the pores, which he calls massaging the sack. Alternatively tie the sack shut and put it in a salad spinner, the poor cook’s centrifuge, though you still have to massage the sack between spins. Quick agar is not quite as clear as freeze-thaw and can go through a coffee filter.

If you have a centrifuge

  • Step 1: add 2 grams of SP-L per litre or kilo; when blending fruit such as strawberries, blueberries, peaches, plums or apricots, add it to the blender and blend until the mix is just above body temperature. Starchy things will not clarify fully.
  • Step 2: check the acidity. If the product is less acidic than grapefruit juice and at body temperature, it is ready to spin; if at fridge temperature, give the SP-L an hour. If it is as acidic as grapefruit juice or more, add 2 grams per litre of kieselsol along with the SP-L, stir, then add 2 grams per litre of chitosan (the 1 percent solution) and stir well, then 2 more grams per litre of kieselsol and stir. The amounts must be accurate, which is why he uses a micropipette.
  • Step 3: spin. Air bubbles may not pop in the centrifuge and leave floaty bits on top, which tomatoes do and bananas do not. A chamber vacuum machine can de-aerate the product first, which is optional. Balance the buckets and spin for 10 to 15 minutes at 4,000 g. Without a refrigerated centrifuge, make sure the buckets are very cold first so the product does not heat up.
  • Step 4: pour off. Pour through a coffee filter or fine strainer in case something floats on top or the puck breaks free.

Less bitter grapefruit: an agar fluid gel

Centrifuge-clarified grapefruit juice tastes more bitter than agar-clarified, because the agar gel holds on to part of the bitter molecule naringin. For his carbonated Gin and Juice he prefers the less bitter juice but finds the centrifuge far more convenient, with better yield and speed. To get both, make a fluid gel: a regular grapefruit gel at 1 percent agar, which is 10 grams of agar per kilo of juice and much firmer than for clarification, blended until totally smooth. A fluid gel is a gel that acts like a liquid when stirred, made of countless tiny gel particles with huge surface area that soak up naringin and are easy to spin out. Add 100 grams of this fluid gel to every 900 grams of grapefruit juice when you add the SP-L and kieselsol, then clarify as usual.

Quotations

In the author's words

  • Do not mess with the agar while it is setting.

    Page 253

Sources

Where this comes from

Written for this guide from the clarification flowcharts of Liquid Intelligence by Dave Arnold (pages 249 to 256); the facts, the amounts and the temperatures are the author's, the wording is ours, and the quotation is given with its page.

More articles

Keep reading

Log in to report a mistake on this page