How Amari Are Made: Extraction Methods Old and New

Distilling, Production and Science, Techniques and Methods

How Amari Are Made: Extraction Methods Old and New

From medieval maceration and percolation to ultrasound and the Naviglio Principle: how an amaro gets the flavour and active compounds out of its roots, barks, leaves and flowers.

  • Based onThe Big Book of Amaro by Matteo Zed

At a glance

From medieval maceration and percolation to ultrasound and the Naviglio Principle, this article explains how an amaro gets the flavour and active compounds out of its roots, barks, leaves and flowers. Each plant has its own structure and needs its own extraction technique.

  1. Traditional methods are maceration (up to 40 days at room temperature), percolation, digestion at 35 to 65 C, infusion, decoction for tough roots and barks, and distillation.
  2. Ultrasound extraction uses sound waves above 20 kHz and the Naviglio Principle uses cyclic pressurisation, both without thermal stress.
  3. Medieval monks were the first keepers of this knowledge and passed dosages and methods down in guarded recipe books.

The herbs come first

An amaro starts with the choice of botanicals: roots, barks, berries, leaves, flowers and fruits. Each plant has its own structure and needs its own extraction technique. According to Matteo Zed, the first keepers of this knowledge were medieval monks, skilled plant experts who isolated what they saw as beneficial principles into elixirs and healing tinctures. Dosages and methods were passed down in recipe books kept in jealous custody.

Traditional methods

Maceration is the most common method: the cleaned and chopped botanicals (fresh or dried) are soaked at room temperature in a sealed container, in amaro’s case a water-and-alcohol mix, then filtered and pressed. It can last up to 40 days. Percolation is also done at room temperature, but the solvent slowly runs through the shredded plants from top to bottom inside a percolator. Digestion is maceration with the solvent and plants warmed to between 35 and 65 °C (95 to 150 °F) to speed up extraction.

Infusion pours boiling water over the chopped plant, for a therapeutic or an aromatic result, and can also be made with alcohol. Decoction boils the plant material with the solvent for at least 30 minutes, which suits tough roots and barks that hold little heat-sensitive material. Distillation relies on pressure and temperature: a still has a chamber for plants and solvent, a cooling part where vapour turns back to liquid, and a vessel for the distillate. Variants include steam distillation, where water is the solvent, and low-pressure distillation for very heat-sensitive compounds.

Innovative methods

Countercurrent extraction is normally used to pull fats from oily plant materials. Ultrasound extraction uses sound waves above 20 kHz on plant walls, with a liquid solvent to carry the waves, and needs no chemicals; it keeps the plant’s molecules intact and shortens the time a great deal. The Naviglio Principle is a solid-liquid extraction by cyclic pressurisation developed by Daniele Naviglio, Andrea Formato and Monica Gallo at the University of Naples Federico II and reported in the International Journal of Food Science. Because there is no thermal stress, it shortens extraction time and keeps heat-sensitive compounds intact; the Naviglio Extractor works at room temperature or cooler and gives consistent results through the forced mechanical action of the liquid on the plants.

Quotations

In the author's words

  • In the case of amaro, maceration of the plant material always takes place in a hydroalcoholic solution

    Page 6

Sources

Where this comes from

Written for this guide from the section The Main Extraction Methods of The Big Book of Amaro by Matteo Zed (Giunti, 2021), pages 4 to 8; the facts are the author's, the wording is ours.

More articles

Keep reading