Measuring Drinks by Volume: Jiggers, Wash Lines and Units

Bar Fundamentals, Batching and Prep, Techniques and Methods

Measuring Drinks by Volume: Jiggers, Wash Lines and Units

Dave Arnold cooks by weight but mixes drinks by volume. He explains the wash line, why free-pouring loses to a tall jigger, his 30 ml ounce, the bar spoon, dash and drop, and when a graduated cylinder or micropipette earns its place.

  • Based onLiquid Intelligence by Dave Arnold

At a glance

Dave Arnold cooks by weight but mixes drinks by volume. He explains the wash line, why free-pouring loses to a tall jigger, his 30 ml ounce, the bar spoon, dash and drop, and when a graduated cylinder or micropipette earns its place.

  1. Drinks are measured by volume because the volume decides the wash line, the level of the drink in the glass, and the same wash line serves every guest.
  2. His units are a 30 ml ounce, a 4 ml bar spoon, a 0.8 ml dash and a 0.05 ml drop, with weights in grams and temperatures in Celsius.
  3. A jigger set of two double cones covers most measuring, and a fat 3/4 or a short ounce is easy to remember.

Volume for drinks, weight for the kitchen

Drinks should be measured by volume.

Dave Arnold is a believer in cooking by weight, but he mixes drinks by volume. Pouring small volumes is much faster than weighing a bunch of small ingredients, and the densities of cocktail ingredients vary wildly, from about 0.94 grams per millilitre for straight booze to 1.33 for maple syrup. For the bartender the weight of the finished drink does not matter; the volume does, because it decides how close the top of the drink sits to the rim of the glass. That liquid line is the wash line. A standard wash line for each drink is an instant visual check that everything is right, and consistent wash lines matter to guests too: when two people get the same drink and one stands taller in the glass, who feels better served?

Why not free-pour?

Free-pourers judge by the liquid level in a glass mixing cup, or count the seconds of a stream from a speed-pour top, and practise for hours to be consistent. Arnold sorts their reasons into four schools:

  • The Lazy do not care if they are accurate.
  • The Speedy think free-pouring is accurate enough and saves a couple of seconds a drink when customers stand six deep. Neither of these two achieves accurate, repeatable results, and free-pouring is particularly inappropriate for a home bartender who pours few drinks and has little practice.
  • The Artist thinks measuring cups look unskilled. Arnold disagrees: masterful jigger work is a pleasure to watch, and no free-pourer is as consistent over as many drinks in as many conditions as someone who measures.
  • The Monk argues that drinks should not be forced into quarter-ounce increments and pours by feel, tasting as they go. Arnold likes Monks, but prefers a standard recipe that can be remembered and followed.

Fixed recipes still allow nuance. Nobody can remember 0.833 ounces of lime juice, but “a fat 3/4” is easy, and two-thirds of the way from 3/4 to 1 ounce is a “short ounce”. Smaller quantities use the bar spoon, the dash and the drop. And the measuring bartender still tastes every drink, with a straw to draw a small sample, to be sure the measured proportions gave the required effect.

His units

  • Ounce: always 1 fluid ounce = 30 millilitres, and his jiggers are sized this way. If yours use a different ounce, measurements will be slightly different, usually not a problem. In a recipe the ounce is really just another word for a “part”: 2 parts booze plus 1/2 part syrup and 3/4 part juice. The 30 ml part is extremely convenient, and for large batches he converts ounce-based recipes with a calculator or spreadsheet, in millilitres at 30 to the ounce.
  • Bar spoon: 4 ml, a bit more than 1/8 ounce. Measure yours.
  • Dash: 0.8 ml, or 36 dashes to the ounce. Dasher tops differ in size, so at the bar they use a half-dasher and a full dasher.
  • Drop: 0.05 ml, so 20 drops to the millilitre and 600 to the ounce.
  • Weight: always grams and kilograms. Water converts easily, 1 gram = 1 millilitre at standard temperature, so he sometimes weighs his water.
  • Pressure: psi and bars (atmospheric pressure is roughly 14.5 psi or 1 bar).
  • Temperature: Celsius and Fahrenheit, though for cocktails he vastly prefers Celsius.
  • Energy: calories (one calorie equals 4.2 joules), because they make intuitive sense when you are heating and cooling water.

Jiggers

His jigger set is two double cones. The larger has a 2-ounce cone with a line for 1 1/2 ounces and a 1-ounce cone with a line for 3/4 ounce, used for anything between 1 and 2 ounces. The smaller has a 3/4-ounce cone with a 1/2-ounce line and a 1/2-ounce cone with a 1/4-ounce line. Those two are enough for most measuring. Pour all the way to the line, or all the way to the top for a full jigger, since people tend to underpour a full jigger, and hold the jigger over the mixing vessel so none of the booze is spilled.

Choose tall, skinny jiggers over short, squat ones: a pour a millimetre higher or lower in a wide jigger is a much larger error. A jigger with straight sides near the top is better still. In his photograph three jiggers hold the same volume, yet pouring short in one leaves it a full 1/8 ounce (3.75 ml) under 2 ounces.

Graduated cylinders and the micropipette

Graduated cylinders are tall, straight columns with millilitre marks, from 10 ml (about 1/3 ounce) to 4 litres, and far more accurate than measuring cups and beakers. He uses them for recipe development and for batching. His most used sizes:

  • 50 ml (a little under 2 ounces): a jigger replacement for fine-tuning a technical recipe or adding very concentrated flavours to large batches.
  • 250 ml (a little more than 8 ounces): up to four cocktails at a time, or the smaller-volume ingredients in larger batches.
  • 1 litre (a little more than a quart): batching by the bottle.

Clear unbreakable plastic versions are cheap; glass costs more. Most people will not need his micropipette, adjustable between 1 and 5 ml and accurate to 0.01 ml. It needs no batteries, and the bar uses it daily for juice clarification and for testing very concentrated flavours, such as concentrated phosphoric acid or quinine sulfate solution, adding small, well-defined amounts bit by bit.

Quotations

In the author's words

  • Drinks should be measured by volume.

    Page 17

Sources

Where this comes from

Written for this guide from the Measurement, Units and Equipment chapter of Liquid Intelligence by Dave Arnold (pages 17 to 21); the facts, the units and the amounts are the author's, the wording is ours, and the quotation is given with its page.

More articles

Keep reading