Rapid Nitrous Infusion with the iSi Whipper

Batching and Prep, Production and Science, Techniques and Methods

Rapid Nitrous Infusion with the iSi Whipper

A cream whipper charged with nitrous oxide can infuse a spirit in one to five minutes: the gas forces liquid into a porous solid and, on venting, pushes the flavoured liquid back out. Dave Arnold explains the method, the variables and the safety points.

  • Based onLiquid Intelligence by Dave Arnold

At a glance

A cream whipper charged with nitrous oxide can infuse a spirit in one to five minutes: the gas forces liquid into a porous solid and, on venting, pushes the flavoured liquid back out. Dave Arnold explains the method, the variables and the safety points.

  1. Charge the whipper with nitrous oxide, shake, wait one to five minutes and vent fast, and the gas boils out and pushes the flavoured liquid out of the solid.
  2. Rapid infusion extracts less of the bitter, spicy and tannic parts, so it needs more solid but gives less bitterness and less heat.
  3. Check the gasket and valve, never store the whipper closed, and use only nitrous oxide, since carbon dioxide makes everything taste carbonated.

Two kinds of infusion, two kinds of tool

Infusion means extracting flavour from a solid into a liquid, soaking a solid with a liquid’s flavour, or both. Making coffee is one-way, since only the liquid is wanted, while brandied cherries give two products, flavoured cherries and cherry-flavoured brandy. Most traditional cocktail infusions take days or weeks. Dave Arnold’s rapid infusion takes seconds or minutes, by changing pressure. It uses one of two kitchen tools that work as mirror images: the iSi cream whipper raises the pressure and then returns it to normal, and a chamber vacuum machine lowers it and then returns it. Either can make either kind, but the whipper is the champion for liquid infusions, which matter most in a bar, and the vacuum machine is best for infused solids, which are mostly garnish.

In nitrous infusion, nitrous oxide, the sweet-tasting gas that dissolves in water, alcohol and fat, dissolves into the liquid and forces it into the solid under pressure, where it extracts flavour. After a short time the pressure is released, the nitrous boils out and pushes the newly flavoured liquid out of the solid.

Rapid versus traditional

Rapid infusion is not better or worse, only different. It extracts less of the bitter, spicy and tannic components than long infusion does, so it suits a product that would otherwise be too bitter, spicy or tannic. Rapidly infused cocoa nibs give a liquor with less bitterness that needs less sugar, and rapidly infused jalapeno tequila has more pepper flavour and less heat. Because it extracts less total flavour from a given amount, rapid infusion needs larger quantities of solid ingredient.

The whipper

The iSi whipper is a stainless steel vessel with a screw-on head that you pressurise with gas chargers through a one-way valve and release through a trigger valve and nozzle. It can take carbon dioxide or nitrous oxide chargers, but for cream and infusions you use only nitrous oxide, since carbon dioxide makes everything taste carbonated. The common sizes are the half-litre whipper, with an actual volume of 772 ml, and the litre whipper, 1,262 ml. Ferran Adria’s use of it for foams at El Bulli in the late nineties made it popular; Arnold dislikes most foams as underflavoured and misapplied, and his whippers sat unused until he realised they could make excellent rapid infusions.

The method in a nutshell

  • Check the whipper. Make sure the gasket is in place, the valve inside the head is clean (it often is not between infusions, and a dirty valve will not seal) and the whipper does not smell. One screwed shut while wet will fester, so never store a whipper closed.
  • Load and charge. His example is turmeric in gin. Turmeric is porous, aromatic, colourful and flavourful, the four qualities to look for in the solid, and gin is strong, clean-tasting and clear. Put the solid in, pour in the spirit, seal and charge. With two chargers, shake for a couple of seconds and add the second quickly. Pressure briefly reaches as much as 360 psi (24.8 bar), then, as the gas dissolves while you shake, drops to between 72 and 145 psi (5 and 10 bar), forcing the gin and nitrous solution into the turmeric.
  • Wait. Usually only one to five minutes, 2.5 for the turmeric. Time it, because even 15 seconds can change the taste. Shaking now and then probably does no harm.
  • Vent. Point the whipper straight up and vent as fast as you can over a container to catch spray. The nitrous expands and boils out of the solution, driving flavoured gin out of the solid. If particles clog the valve, pump it hard; as a last resort, unscrew the head over a container. iSi machines a pressure release into the threads so liquid runs down the side instead of blowing the lid off, one reason to buy the brand.
  • Listen, strain and rest. After venting, open the whipper and listen to the bubbling as nitrous keeps pushing flavour out. When it dies down, strain. The flavour often gets stronger for a couple of minutes afterwards, so Arnold rests an infusion for about 10 minutes before using it. iSi now sells an attachment that makes venting less messy and avoids clogs.

The variables

The solid. It must be porous, because the pressure injects liquid into its pores: coffee, cocoa nibs, galangal, ginger, peppers, most plant products. Slicing thinly or grinding gives the liquid access to more pores, and cutting and grinding consistently matters more than in a long infusion.

Ratio. Rapid infusion needs more solid, which is a feature: if he wants to reduce the extraction of a flavour he dislikes, like the detergent note in lemongrass, he infuses a lot of lemongrass for a short time.

Temperature. Most infusions are done at room temperature. Cold slows the infusion and reduces bubbling when venting; heat gives fast extraction and often too much bubbling. When he wants a lot of flavour including bitterness, he heats the sealed whipper, which keeps volatile aromas in, but he cools it before venting.

Pressure. He almost always wants as much pressure as possible. Higher pressure gives faster and more balanced infusions that favour aromas, top notes and fruitiness over bitterness and muddiness, and lowering the pressure and infusing longer does not give the same result. For consistent results use the same pressure each time: follow the recipe exactly, including amount of ingredients, whipper size and number of chargers. Each charger holds 7.5 grams of nitrous oxide. The pressure depends on the size of the whipper (a full litre whipper gives much less per charger than a half-litre one), how full it is, since solids and liquids take up room (a half-litre whipper holding 500 ml of 40 percent vodka reaches 100 psi, 6.9 bar, on one charger, while an empty one reaches 78 psi, 5.4 bar), and the liquid, since nitrous dissolves better in ethanol, so strong spirits give lower pressure.

Time. Bitters and tinctures take 5 minutes to an hour and tolerate some sloppiness, but infused liquors take just 1 to 2 minutes, so use a timer, especially with strong bitter ingredients like coffee and cocoa nibs, where the line between too weak and too bitter is thin.

Venting. Venting makes the flavour-extracting bubbles, so vent fast: the faster, the more violent the bubbling and the more flavour. Spray is good. A clogged valve prolongs the infusion and gives weaker bubbling, so do not agitate right before venting, let the particles sink, and aim the whipper up. A clog shows when the rush of gas stops suddenly instead of fading out. Do not strain at once unless the recipe says so, because the bubbles are still extracting; they are the sound of infusion.

Which gas, and the two-charger question

Some called the method nitrogen infusion, confusing it with nitrogen cavitation, a laboratory technique that forces nitrogen (N2, not N2O) into solution at 800 psi (55 bar) or more and ruptures cells when the pressure is released. Nitrous infusion uses roughly a tenth of that pressure and relies on how soluble N2O is. Carbon dioxide is soluble in alcohol and water but would alter the taste.

iSi does not endorse putting two chargers in a half-litre whipper unless you vent fully before the second, though Arnold says the practice is entirely safe: iSi whippers withstand many times the pressure involved and have a safety mechanism, and the first sign of failure would be a bulge at the bottom, not an explosion. iSi’s position partly reflects French rules on whippers and the danger of cheap no-name whippers without safety releases. Arnold advises never to exceed the pressure with no-name units, which also tend to leak. For recipes with two chargers, iSi recommends charging once, shaking, fully venting and adding the second charger, which gives a lower final pressure than his preferred method but is still better than one.

Scaling up

Cream whippers hold at most a litre. For large batches of infused liquor, use a Cornelius soda keg, which holds up to 5 gallons and easily withstands 100 psi (6.9 bar); most are rated for 130 psi (9 bar), though the relief valve often starts venting before that. A keg gives constant gas pressure instead of a charge you reduce by shaking, so it does not matter whether you fill it to the same level each time. Most people will have to use carbon dioxide, because nitrous oxide is very hard to get in a tank, since suppliers fear it will be abused as a drug.

Quotations

In the author's words

  • Rapid infusions happen so fast that even 15 seconds' difference in infusion times can make a taste impact.

    Page 193

Sources

Where this comes from

Written for this guide from the Rapid Nitrous Infusion section of Liquid Intelligence by Dave Arnold (pages 189 to 197, and the note on scaling up on page 217); the facts, the numbers and the safety points are the author's, the wording is ours, and the quotation is given with its page.

More articles

Keep reading